uPVC Door Repair Swansea. Fixed first visit.
Door won't lock, handle gone floppy, or key won't turn? We repair the mechanism instead of replacing the door. Fixed price agreed before we start.
Landline: 01792 732932 · Speak directly to the engineer
- No call-out fee
- Fixed price before we start
- 12-month warranty on parts
- DBS checked & fully insured
- 1 visitMost repairs done same day
- 5.0 ★64 five-star Google reviews
- 12 monthsWarranty on parts
- £0Call-out fee
What's wrong with your door?
Most uPVC door faults come down to a handful of parts. We carry the common gearboxes, multipoint locks and cylinders in the van.
| Problem | Usual cause | Typical price |
|---|---|---|
| Door won't lock when you lift the handle | Worn or broken gearbox | £160–£280 |
| Handle is floppy or drops down | Snapped gearbox spring or handle | £160–£280 |
| Key won't turn or is stiff | Worn cylinder or misaligned door | from £95 |
| Door catches or is hard to close | Door has dropped on its hinges | price on call |
| Door stuck locked shut | Failed multipoint mechanism | £160–£280 |
| Old cylinder can be snapped | Non anti-snap cylinder fitted | from £95 |
From broken door to locking properly
Send a photo
WhatsApp a photo of the door edge and handle, or describe the problem on the phone.
Get a fixed price
We identify the part and give you the price before booking. No call-out fee.
Fixed on the day
We fit the new mechanism, adjust the door so it closes properly and test every lock point.
"Had an issue with my uPVC door which would lock/unlock, but wouldn't open. Contacted Adam and he was able to open the door and despite the door being old, was able to fix and replace parts. Very professional, friendly, great communication and a good price. Highly recommended."Rhuanydd C. · uPVC door repair · Google review
"Fantastic service. I’m always a bit weary of having any work done unless it’s been recommended, I’m glad I contacted…"Ann C. · patio door repair · Google review
"Excellent service. Rapid response, contacted and came out the same day. Very helpful and friendly. Genuinely nice guy."Lee H. · Google review
uPVC door repairs across Swansea and surrounding areas
- Sketty
- Swansea City Centre
- Uplands
- Mumbles
- Gower
- Morriston
- Gorseinon
- Neath
- Port Talbot
- Llanelli
- Bridgend
Not sure if we cover you? Call and we'll give you a time straight away.
uPVC door repair questions
How much does a uPVC door repair cost in Swansea?
Most mechanism repairs cost £160–£280 including parts and labour. Cylinder replacements start from £95. You get a fixed price before we start, with no call-out fee.
Do I need a new door or can it be repaired?
Almost always repaired. A door that won't lock usually needs a new gearbox or multipoint mechanism, not a new door.
Can you fix it the same day?
Usually, yes. We carry the most common mechanisms. For unusual or older doors we may need to order the part and return.
My door is stuck locked. Can you open it?
Yes. We can open a door with a failed mechanism, usually without damaging the frame, then fit the replacement parts.
Is the repair guaranteed?
Yes. Parts we fit come with a 12-month warranty on parts.
Get your door locking properly again
WhatsApp a photo of the problem and we'll reply with a fixed price, usually within the hour.
Landline01792 732932